HI-PERFORMANCE PRODUCTS made in U.S.A.              XENON FOG LAMPS made in GERMANY             VEHICLE PROTECTORS made in AUSTRALIA             AIR FRESHENERS made in JAPAN              CAR MATS made in ITALY             AUTO PLUS MART made for YOU !            
   Home   Contact

By categories
Air Fresheners
Car Audio
Car Care Chemicals
Horns
Lamps & Lighting
Out door and Recovery products
Performance Parts
Protective Accessories
Sun Control Films
Wiper Blades
Other accessories
Our Installations
EGR STC Global Impex OSRAM HELLA BOSCH
SIMOTA ACCEL MR. GASKET MSD IGNITION DYNAMAT
HOLLEY AUTOMETER DBA HELIOS PRO BLEND
RESTORE PYRAMID BLITZ LANZAR

MSD engineers and technicians are constantly searching for new and innovative ways to design and improve ignition components. New products go through a battery of hands-on testing including test vehicles and engines. MSD four in-house dynos are constantly putting prototype components through a battery of tests on a variety of test engines from stock daily drivers to modern Pro Stock powerplants. After dyno and bench testing results meet our engineers standards, the components are installed on test vehicles and run on one of our two chassis dynos for even more testing. MSD in-house dynos are constantly putting new technology to the test.

MSD 5 Ignition, PN 5200

The MSD 5 is our entry level multiple spark ignition control. This inductive discharge ignition is designed to be used on stock vehicles with no performance upgrades such as a cam, intake manifold, or carburetor.

Below 3,000 rpm, the MSD produces a series of sparks instead of just one. This ensures that the fuel is burned completely which in turn provides more power, smooth idle, quick starts and overall driveability improvements.

The MSD 5's powerful sparks are just the ticket to enhance the power of your foreign or domestic car's ignition output. The MSD 5 can be triggered using points or the electronic amplifier on late model vehicles.


NOTE: Not for use with magnetic pickup distributors or distributorless systems. Not recommended for General Motors HEI ignition systems.

OPERATING SPECIFICATIONS FOR MSD 5 IGNITION
Operating Voltage: +12 VDC Negative Ground
Current Requirements: 6 Amps Max
RPM Range: 6,000 RPM (8 cyl.)
Spark Duration: 20 Crankshaft Rotation
Energy Output Max: 140 mJ Stored Energy (inductive ignition)
Weight and Size: 1.5 lbs, 8"Lx3.5"Wx2.25"H
Voltage Output Max: Primary: 375 Volts
Secondary: 40,000 Volts (Blaster Coil)


MSD 6A, PN 6200

The MSD 6A is the base model of the capacitive discharge multiple spark 6 Series design. Whether you have a powerful street machine, hard working truck or trick street rod, the powerful multiple sparks of the MSD 6A will ensure complete combustion. Benefits such as quicker ETs, easier starting, reduced plug fouling, more power and even increased fuel economy can be expected with the 6As high energy multiple sparks.

Like all of the MSD 6 Series Ignitions, the 6A will work with virtually any vehicle as long as it has a 12-18 volt electrical system. It can be triggered using breaker points, a magnetic pickup or the output of an electronic amplifier. All necessary parts and wiring instructions are included.

OPERATING SPECIFICATIONS
Operating Voltage: +10-18 VDC Negative Ground
Current Requirements: 5 Amps-5,000 RPM 10 Amps-10,000 RPM
RPM Range: 15,000 RPM with 14.4 Volts
Spark Duration: 20 Crankshaft Rotation
Energy Output Max: 105-115 mJ Per Spark
Weight and Size: 2.75 lbs, 8"Lx3.5"Wx2.25"H
Voltage Output Max: Primary: 460-480 Volts
Secondary: 45,000 Volts (Blaster Coil)



MSD 6AL, PN 6420

The 6AL shares the same proven circuitry of the 6A with the addition of a built-in adjustable rev limiter. The combination of powerful sparks with the safety of a Soft Touch Rev Control is what makes the 6AL the most popular ignition control in the world.

MSD first developed the Soft Touch rev control to prevent overrev damage to your motor in the event of a missed shift or driveline failure. The rpm limit is adjustable in 100 rpm increments with MSDs plug-in modules. When the engine reaches your selected limit, the Soft Touch circuitry begins dropping the spark to various cylinders. On the next cycle, these plugs are fired again to prevent fuel from loading up in the cylinder. The result is a smooth and accurate limiting action without backfires or roughness.

The Soft Touch Rev Control also opens the door for you to add rpm accessories such as a Two Step Rev Control. A Two Step allows you to set two rpm limits, one for a holeshot rpm and another for overrev protection.

The 6AL is supplied with rubber shock mounts and modules for 3,000, 6,000, 7,000 and 8,000 rpm.

OPERATING SPECIFICATIONS
Operating Voltage: +10-18 VDC Negative Ground
Current Requirements: 5 Amps-5,000 RPM 10 Amps-10,000 RPM
RPM Range: 15,000 RPM with 14.4 Volts
Spark Duration: 20 Crankshaft Rotation
Energy Output Max: 105-115 mJ Per Spark
Weight and Size: 3 lbs, 8"Lx4"Wx2.25"H
Voltage Output Max: Primary: 460-480 Volts
Secondary: 45,000 Volts (Blaster Coil)



MSD Blaster Coils

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. All of the Blaster Coils are designed for improved spark output!

Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark.

There are several versions of the Blaster Coil available. All of them have the same internal specifications, but have different housings or components. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

BLASTER 2 AND 3 SPECIFICATIONS
Output Voltage: 45,000 Volts Maximum
Operating Voltage: 12VDC
Primary Resistance: 0.7 Ohms
Secondary Resistance: 4.7K Ohms
Turns Ratio: 100:1
By brands
AUTOPLUS
ACCEL
AUTOMETER
BOSCH
BLITZ
DBA
DYNAMAT
EGR
HELIOS
HELLA
HOLLEY
KDG - HID
KEEPER
LANZAR
LEGACY
CARFRESHNER
Mr. GASKET
MSD Ignition
OSRAM
PRO BLEND
PYRAMID
RESTORE
SIMOTA
STC Global Impex
   Copyright 2003 AUTO PLUS MART L.L.C. All trademarks or service marks are property of their respective owners.